This is a zircon and isopropanol alcohol based mould and core coating. It is used for sand moulds and cores when pouring large or complex grey cast iron, nodular iron and steel castings. It can be used on most chemically bonded sand systems. It has very high refractoriness.
Application:
It can be applied:
- by brushing
- by dipping
- by flooding
- by spraying
When dipping or spraying the coating must be diluted by ethanol or isopropyl alcohol. The coating should be well mixed before use or dilution. It is recommended to check the readiness of the coating using a viscometer or using a Baume hydrometer. The coating can then be hardened in air or by flaming off.
Storage / Handling Precautions
Perma-Cote 100S is classified as a HIGHLY FLAMMABLE PRODUCT, so appropriate precautions should be taken when handling and storing. Avoid contact with eyes and skin, wear protective clothing. Review the appropriate safety data sheet to ensure that the handling procedures are known and understood.
Packaging:
70 kg metal barrels.
